The Flex System EN2024 4-port 1Gb Ethernet Adapter is a quad-port Gigabit Ethernet network adapter. When it is combined with the Flex System EN2092 1Gb Ethernet Scalable Switch, clients can leverage an end-to-end 1 Gb solution on the Flex System Enterprise Chassis. The EN2024 adapter is based on the Broadcom 5718 controller and offers a PCIe 2.0 x1 host interface with MSI/MSI-X. It also supports I/O virtualization features like VMware NetQueue and Microsoft VMQ technologies.
The Flex System EN2024 4-port 1Gb Ethernet Adapter is a quad-port Gigabit Ethernet network adapter. When it is combined with the Flex System EN2092 1Gb Ethernet Scalable Switch, clients can leverage an end-to-end 1 Gb solution on the Flex System Enterprise Chassis. The EN2024 adapter is based on the Broadcom 5718 controller and offers a PCIe 2.0 x1 host interface with MSI/MSI-X. It also supports I/O virtualization features like VMware NetQueue and Microsoft VMQ technologies.
- Dual Broadcom BCM5718 ASICs
- Quad-port Gigabit 1000BASE-X interface
- Two PCI Express 2.0 x1 host interfaces, one per ASIC
- Full-duplex (FDX) capability, enabling simultaneous transmission and reception of data on the Ethernet network
- MSI and MSI-X capabilities, up to 17 MSI-X vectors
- I/O virtualization support for VMware NetQueue, and Microsoft VMQ
- Seventeen receive queues and 16 transmit queues
- Seventeen MSI-X vectors supporting per-queue interrupt to host
- Function Level Reset (FLR)
- ECC error detection and correction on internal SRAM
- TCP, IP, and UDP checksum offload
- Large Send offload, TCP segmentation offload
- Receive-side scaling
- Virtual LANs (VLANs): IEEE 802.1q VLAN tagging
- Jumbo frames (9 KB)
The dimensions and weight of the adapter are as follows:
- Width: 100 mm (3.9 inches)
- Depth: 80 mm (3.1 inches)
- Weight: 13 g (0.3 lb)
Shipping dimensions and weight (approximate):
- Height: 58 mm (2.3 in)
- Width: 229 mm (9.0 in)
- Depth: 208 mm (8.2 in)
- Weight: 0.4 kg (0.89 lb)
Part Code:
EN2024