A versatile, powerful tool for remote management of automation and assembly/packaging equipment at manufacturing sites, automated distribution centers, refinery plants – or any industrial setting – it provides complete access and control of virtually any type of equipment with a serial port!
A versatile, powerful tool for remote management of automation and assembly/packaging equipment at manufacturing sites, automated distribution centers, refinery plants – or any industrial setting – it provides complete access and control of virtually any type of equipment with a serial port!
- Cascade multiple devices from a single network connection
- Connects enterprise systems to non-networked factory floor devices
- Enables remote firmware upgrades, saving time and money
- Supports industrial protocols
- Maximizes flexibility with an internal 2-Port 10Base-T/100Base-TX Ethernet switch
- 15kV serial ESD protection and 2.5kV Ethernet isolation
- Wide -40°– 70°C operational temperature range
- RoHS compliant
Serial Interface
- 2 RJ45 RS-232 Serial Ports
- Baud rate selectable from 300 to 230 Kbps
- 1 screw terminal RS-422/485 interface on Serial Port 2 (2 and 4-wire support)
- LED indicators for TXD and RXD activities
Serial Line Formats
- Characters: 7 or 8 data bits
- Stop Bits: 1 or 2
- Parity: odd, even, none
Flow Control
- Hardware: RTS/CTS
- Software: XON/XOFF
Modem Control
- DTR, DSR
Network Interface
- 2 RJ45 10Base-T/100Base-TX Ethernet ports
- Embedded, unmanaged, fully compliant 802.3u non-blocking Ethernet switch
- Store and forward architecture with 1K MAC address lookup table
- Automatic MDI/MDI-X crossover
- Full duplex IEEE 802.3x flow control
- Half duplex back pressure flow control
- IEEE 802.1d spanning tree
LED Indicators
- TX/RX activity per serial
- Link/Activity per Ethernet port
- Power/System OK
Management
- Internal web server (standard tunneling firmware only)
- SNMP (read only)
- Serial login
- Telnet login
- DeviceInstaller software
Isolation
- 8 kV direct contact, 15kV air discharge, ESD protection on all Serial ports (IEC 1000-4-2, IEC 61000-4-2)
- 2 K VAC / 2.8K VDC galvanic isolation between Power Input port to Ethernet ports (except Chassis ground)
- 2 K VAC / 2.8K VDC galvanic isolation between Power Input port to Serial ports
- Transient Voltage protection and ESD with max non-repetitive surge current 800 Amp (8/20 μs) (IEC 61000-4-2)
- 2 K VA / 2.8K VDC galvanic isolation between Ethernet ports (except chassis ground)
- 2 K VA / 2.8K VDC galvanic isolation between Ethernet ports to Serial ports
- 40 A (5/50 ns) EFT protection (IEC 61000-4-4), 12 A (8/20 μs) lightning protection (IEC 61000-4-5) on all Ethernet ports
Power Input
- Removable screw terminal block connector
- 9-30 VDC or 9-24 VAC with chassis ground
- 2.3 Watts maximum
Environmental (Operating)
- Temperature: -40°C to +70°C (-40 to 158°F)
- Humidity: 20% to 90% relative humidity, noncondensing
Agency Approvals
- UL, CSA, FCC, CE, TUV, CTick, VCCIs
Protocols Supported
- ARP, UDP/IP, TCP/IP, Telnet, ICMP, SNMP, DHCP, BOOTP, TFTP, and HTTP
Installable Industrial Application Protocols
- ModBus TCP, ModBus ASCII/RTU, DF1 Multi-Master
CPU
- Lantronix DSTNI-EX 48 MHz clock, 256 KB SRAM Internal CPU Memory
Flash Memory
- 2 MB Flash
EEPROM
- 2 KB
Reset
- Front panel recessed push button
Part Code:
XSDR22000-01