Black Box LPH2008A-4GSFP Industrial Managed Gigabit Ethernet PoE+ Switch
In stock
Part Code :
LPH2008A-4GSFP
Add your review Black Box LPH2008A-4GSFP Industrial Managed Gigabit Ethernet PoE+ Switch - 8-Port RJ-45, 4-Port SFP.
Increase network reliability and add redundancy in harsh environments.
Black Box LPH2008A-4GSFP Industrial Managed Gigabit Ethernet PoE+ Switch - 8-Port RJ-45, 4-Port SFP.
Increase network reliability and add redundancy in harsh environments.
- Has eight PoE+ (802.3at) ports and four Gigabit SFP ports.
- Use to connect and power security cameras and access points.
- Offers less than a 30-msec recovery time, link failover, and redundant power inputs.
| Technology | |
| Address Table Size | 8K |
| Distance | Copper Ethernet ports: 328 ft. (100m); SFP: Depends on SFP |
| Forwarding and Filtering Rate | 14,880 pps for 10 Mbps, 148,810 pps for 100 Mbps, 1,488,810 pps for 1000 Mbps |
| Packet Buffer Memory | 2 Mbits |
| Priority Queues | 4 |
| Processing Type | Store-and-Forward; Half-duplex back-pressure; IEEE 802.3x full-duplex flow control |
| Management | RS-232 console (RJ-45), Telnet, SNMP v1, v2, and v3, RMON, Web browser, TFTP management |
| Security | Port-based network access control (802.1x); VLAN (802.1Q) to segregate and secure network traffic; Radius centralized password management; SNMPv3 encrypted authentication and access security; Device binding; https/ssh enhances network security |
| Switch Properties | |
| Switching Latency | 7 µs |
| Switching Bandwidth | 24 Gbps |
| VLANs | 256 maximum available |
| IGMP Multicast Groups | 128 per VLAN |
| Port Rate Limiting | User-defined |
| Interface | |
| Connectors | (8) RJ-45 10/100/1000, auto MDI/MDI-X, PSE ports, (4) Gigabit SFP ports |
| Console Port | (1) RJ-45 RS-232 |
| Physical | |
| Alarm Contact | (1) Relay output with current 1A @ 24 VDC |
| Enclosure | IP-30 aluminum |
| Dimensions | 6.06"H x 3.8"W x 4.27"D (15.4 x 9.64 x 10.85 cm) |
| Weight | 2.7 lb. (1.23 kg) |
| Indicators | (3) Power LEDs: Power Status, Power 1, Power 2, (1) Ring Master LED, (1) Ring Enabled LED, (1) Fault LED, (4) PoE LEDs for RJ-45 LAN ports, (4) SFP Link/Act LEDs for fiber uplink ports, (4) RJ-45 Link/Act LEDs, (4) RJ-45 Full-duplex LEDs |
| Power | Input: (2) power inputs on 6-pin terminal blocks: 48 to 57 VDC; Consumption: 13.2 watts (unit only, not counting PoE) |
| Environmental | |
| Operating Temperature | -40° to +158° F (-40° to +70° C) |
| Storage Temperature | -40° to +185° F (-40° to +85° C) |
Part Code:
LPH2008A-4GSFP
Related Products BY Category
