Server Technology C-16HF2-L30 Metered FSTS C-16HF2/E 6.6kW - 14.6kW (16) C13 Outlets

ServerTech
In stock
Part Code :
C-16HF2-L30


The Server Technology Metered Fail-Safe™ provides fail-over redundancy to single or dual-power supply servers and network devices. Exclusive to the Metered Fail-Safe is its ability to carry loads on the A circuit, B circuit or both.

Similar, but unlike a common automatic transfer switch, the Metered Fail-Safe unit is unique in that it contains two (2) in-feeds and two (2) banks of outlets.

For example he "A" in-feed routinely powers just the A1-8 outlets, and the "B" in-feed routinely powers just the B1-8 outlets. However, if the "A" in-feed goes down, the "B" in-feed powers all 16 outlets and the same if the "B" in-feed goes down, the "A" in-feed powers all the outlets.

This "Fail-Safe" method has several advantages compared to a standard ATS because it does not prohibit load balancing between the two supplied circuits. A standard ATS contains two-in-feeds, but runs all outlets from just one source, with the secondary source only being used once an outage occurs on the capacity. This results in less heat, less resistance, and consequently less of a voltage drop compared to the same load existing on just one source. Only when an outage occurs on one of the two sources will the entire load be applied to a single source.

The  Server  Technology®  Fail-Safe  Transfer  Switch  (FSTS)  provides  fail-over  redundancy  to  single  or  dual  power  supply servers and network devices. Exclusive to the Fail-Safe Transfer Switch is its ability to carry loads on both the A and B circuits during normal operation. Unlike a common automatic transfer switch, the Fail-Safe unit is unique in that the "A" in-feed routinely powers half the outlets, and the "B" in-feed routinely powers the other half. However, if either in-feed goes down, the other powers all outlets. This "Fail-Safe" method has several advantages compared to  a  standard  ATS.  A  standard  ATS  contains  two-in-feeds,  but  runs  all  outlets  from  just  one  source,  with  the  secondary  source  only  being  used  once  an  outage  occurs.  The  Server  Technology  design  does  not  prohibit  load balancing between the two supplied circuits which results in less heat and a lower voltage drop compared to the same load existing on just one source. Only when an outage occurs on one of the two sources will the entire load be applied to a single source.

Input Power Capacity (kW): 5
Input Plug Type: NEMA L6-30P
Input Current (A): 30
Input Current Rated (A): 24
Input Nominal Voltage (V): 208
Input Phase: 1-Phase (L-L)
Input Cord Location: Horizontal
Total Outlets: 16
IEC C13 Count: 16

Part Code:
C-16HF2-L30

You're reviewing:Server Technology C-16HF2-L30 Metered FSTS C-16HF2/E 6.6kW - 14.6kW (16) C13 Outlets
Your Rating