Designed for use with difficult-to-tag,rack-mounted equipment, these affordable and reusable IR-enabled sensors work in conjunction with the A740 Rack Locator to allow you toinstantly determine and verify the location of rack-based ITassets.
M174 IR-EnabledLocation Sensors are equippedwith on-board infrared (IR) sensors. These sensors are designed to be deployed in concertwith RF Code’sA740 Rack Locators andA750 Room Locators. IR-enabled sensors monitor their environmentforincoming IRsignals and periodically report both their own unique ID and IR location codes. Tagged assets can be rapidly located with rack-level or room-level precision. The M174 enclosure is injection-molded using an IR-transparent material that synchronizes the sensor with the nearest IR transmitter. Since the location is determined via the IR code, there is no need forsignalstrength calculations or triangulation algorithms.
- Encoded Radio Transmissions at 433 MHz
- Specially Designed for Use with U-Mounted,Rack Installed Assets
- Small, Light-weight Active RFID Sensor
- Industrial-Strength Installation Tabs Keep Sensor Securely in Place
- New IR Sensor with 4 Diodes Receives IR from Any Direction
- Superior Anti-Collision Technology for High Sensor Densities
- Designed for Use with the A740 Rack Locator
- Easy Installation
- On-Demand Inventory of Rack-MountedAssets
- Low Power Consumption for Long Battery Life
- OPERATION
Operating Frequency-433.92 MHz
Group Code & Sensor ID Codes-540,000 unique IDs per Group Code
Typical Transmission Range-up to 300 ft
Radiated Emissions-71.8 dBuV/m at 3 meters (maximum)
Modulation-ASK
Stability-Saw stabilized
- ENCLOSURE
Case Length-1.56 in (39.6 mm)
Case Width-1.27 in (32.3 mm)
Case Height-0.35 in (8.9 mm)
Case Weight (with sensor)-0.4 oz (11 g)
Construction-Lexan polycarbonate
Durability-Tough, impact resistant and temperature stable
Mounting Options-Replaceable, interchangeable flag, loop, and thumb-screw mounting tabs
- ENVIRONMENTAL
Operating Temperature- -20° C to +70° C
Storage Temperature- -40° C to +80° C
Operating Humidity - < 95% RH non-condensing; not recommended for outdoor applications
- IR COMPATIBILITY
Rack Locators- RF Code A740 with Series 2 Protocol
Room Locators- RF Code A750 with Series 2 Protocol
- POWER
Battery Type- Lithium CR2032 coin cell
Smart Sensor Feature- Low battery indication
Battery Life- > 5 years
Part Code :
M174