Racks & Cabinets

The A740 Rack Locator, used in conjunction with RF Code IR- enabled location sensors, facilitates accurate and affordable rack- level asset location awareness.

The Watchdog 1200 and Watchdog 1250 provide Web-based remote surveillance of temperature, relative humidity, dew point, airflow, light, sound and additional sensors connected to the unit. Configure SNMP, Email, and Email-to-SMS alerts when user-specified thresholds are breached.

As with all Watchdogs, the Watchdog 100 allows users to keep an eye on remote conditions from a secure web interface and receive SNMP, e-mail, text message (via your carrier's email-to-SMS gateway) and voice call* alert notifications when user-specified thresholds are breached.

The SD2 is a low-voltage smoke detector with a built-in dry-contact relay output, suitable for use with any Geist environmental or power + environmental monitoring unit equipped with analog-sensor inputs. Comes pre-wired with a 12VDC power supply and a 25ft (7.6m) length, 2-conductor alarm wire for easy installation.

The Power Failure Sensor is an analog sensor that enables a Geist Climate Monitor to detect line voltage and send an alert through email or SNMP trap if power is lost. This provides time to either restore power or properly shutdown the system before backup power is exhausted.

The Isolated Voltage Sensor, in combination with a Geist Climate Monitor, allows you to track and monitor DC voltages used in battery-backup and telecom systems.

The GT3HD digital sensor collects and transmits real-time temperature, humidity and dew point data to protect critical data center equipment from heat and moisture.

This sensor enables the Geist Climate Monitor to monitor DC low-voltage systems. Using logs and graphs provided by the Geist Climate Monitor you can remotely check on the status of the system. Find out if the batteries are being overcharged or not charged enough.

Current Transducers encircle a single power wire and transform the AC amperage into a 0 to 5 VDC signal suitable for input into a Geist Climate Monitor. A selector switch allows you to chose one of the sensor’s three current ranges.

The flood sensor allows the Geist Climate Monitor to detect leaks that could damage your equipment. The sensor measures conductivity and indicates whether the sensor is dry or wet.

The relay controlled GSM auto-dialer adds an additional level of alert notification.