Opengear IP-PDU9108-IEC PDU

The rack mount IP-PDU 9108 PDU controls eight (8) AC power outlets. The PDU can be securely controlled over the network using the web interface or SNMP.

The IP-PDU is an Internet ready device designed and is equipped with an intelligent current-meter (True RMS) that will indicate the total power consumption of a power strip.

The IP-PDU offers an easy set up and user-friendly communication software. This software provides the function that assistant manager to remotely monitor the multiple PDU power consumption to realize the total current power consumption and utilization for the enterprises.

Built-in web server enables real time remote monitoring of the current consumption of the power strip
Build-in true RMS current meter
Easy set up (e.g. the meter can read the IP address directly)
Secure with SSL support
Provides audible alarm when the power consumption over the threshold of warning and overload
Sends email and SNMP traps when the power consumption exceed the trigger value of warning or overload to the PDU
Supports SNMP and provides MIB for the PDU to be monitored by NMS
Provides per outlet power protection by the circuit breaker
Real time individual control of each PDU outlet
Indicate outlets status with LED
Supports power on sequence

USA model
Output 8 x NEMA 5-15/20R outlets
Input 1 x IEC320 C20 inlet
Enclosed IEC320 C19 to NEMA 5-15P Power Cord 3 Meters long
Protection 1 x 15 AMP Circuit Breaker
Nominal Voltage 115V
Frequency 50/60HZ full range
For 110-127V
- Total Max output current for per 4 outlets : 15 Amp (UL derated 12 Amp)
- Use power IN cable with 15A current rating
- Use power OUT cable with 150A rating for each power outlet
Regulatory Approvals
CE, EN 55022 Class A, EN 55024,EN 61000-3-2,EN 61000-3-3
C-Tick AS/NZS CISPR 22: 2006
FCC Part 15 Class A, ICES-003

Lead Source
Website Source

Lead Source
Website Source