Opengear 508000 - 9258 IP Power

Opengear
In stock
Part Code :
508000 - 9258 IP Power


IP Power 9258 power strips allow browser control of four AC power outlets. The strip is IP addressable, so each outlet can be independantly turned ON/OFF or cycled for power-on reset.

  • Built in web server can be accessed locally or remotely over the Internet
  • Supports multiple browser types (e.g. Fierfox, Internet Explore, Netscape) so you can operate the switch and check the state without any custom
  • Can be managed using serial port when connected to Opengear console server
  • Controls four AC outlet equipment at the same time
  • Supports HTTP, DDNS , SMTP, SNMP, INTERNET- fixed IP, DHCP, LAN - virtual IP
  • Security password identity. Easily installed and can be updated online
  • RS232 port communicates real time state of 9258
  • Separated LED indicates the state of each switch
  • Safely designed for high voltage resistance and protection for leakage of electrical currency, using nonflammable material
  • Network server reboot can remote control to reboot the power on for the PC or Server at remote site
  • Timer Schedule can pre-set the time schedule to turn power on / off
  • NTP (Network Time Protocol ) support synchronizes the time of 9258 to the Internet web address time
  • Setup up own outlet default : when regain power it store each outlet to those status setting
  • Arrange own webpage design : Change the user-defined graphics and hyperlinks to customize the web pages by webpage SDK
  • Provide SDK (VB & VC) for own software develop and application
  • Safety shut down controlled PC/ Server ( Windows )

 

The compact IP Power 9258 PDU controls four AC power outlets. The PDU is IP addressable, so using a browser each outlet can be independently turned ON/OFF or cycled for power-on reset. The IP Power can also be controlled over the serial port when connected to an Opengear console server.

The IP Power is generally connected to the 10/100 local network and controlled using a standard web browser. Once the security login is approved, power at each of the outlets is controlled with a simple click in the browser.

Servers and network devices at local and remote sites can be rebooted - saving time and the cost of a remote site visit. Configurable timer options allow you to schedule powering remote appliances off and on. These schedules can be reprogrammed at any stage locally or remotely.

Each outlet can supply up to 6A of 120VAC or 250VAC power, using standard IEC 320 Inlet/Outlet power connectors. The power status is clearly displayed on the front panel and each outlet can also be manually controlled from there. No complexity. No software skill required. 

 

  • USA model
  • NEMA5-15P outlets
  • For 100-120V
    • Total Max output current for per 4 outlets : 15A.
    • Individual Max output current for per outlet : 6A.
    • Use power IN cable with 15A current rating
    • Use power OUT cable with 10A rating for each power outlet
  • EC 320 Connector design (one Male type Inlet for power in, four Female type Outlet for power output)
  • Installs with standard PC power cords
  • One AC Power rocker switch with light
  • Four LED power switch status indicators
  • One RJ45 for Ethernet control.
  • One RS232 for UART control
  • Dimension 220mmx120mmX45mm metal case

 

 

Part Code

508000 - 9258 IP Power

You're reviewing:Opengear 508000 - 9258 IP Power
Your Rating