Networking

NETGEAR ProSafe 10 Gigabit SFP+ transceivers fit into M5300, M7100 and M7300 series standard SFP+ interfaces, providing hot-swappable installation and removal. Select Smart switches and Plus switches will also connect 10 Gigabit SFP+ transceivers.

Netgear AXM761 compatible BlueOptics© 10GBASE-SR SFP+ Transceiver for Highspeed Data Transmissions in Optical Fiber Networks. Supports Ethernet, Fibre Channel or SONET/SDH applications in Switches, Routers, Storage Systems and similar hardware. The Netgear AXM761 10GBASE-SR SFP+ Transceiver can also be adjusted to work in different temperature ranges.

The NETGEAR Chassis M6100 series delivers L2/L3/L4 and IPv4/IPv6 rich services for enterprise edge and SMB core deployments, as well as 1G / 10G mixed infrastructures in server rooms.

The NETGEAR Chassis M6100 series delivers L2/L3/L4 and IPv4/IPv6 rich services for enterprise edge and SMB core deployments, as well as 1G / 10G mixed infrastructures in server rooms.

The ProSAFE Plus16 and 24-port Gigabit Switch with PoE provides simple network management delivering network monitoring, traffic prioritization and network segmentation beyond simple connectivity. They also come with features such as IGMP snooping, cable diagnostics, loop prevention and Auto DoS prevention, providing much needed improvement for network performance and resilience.

The NETGEAR GS110TP comes with 8 dedicated 10/100/1000 Mbps copper ports to connect to your end devices and two additional Gigabit Fiber ports for uplinks with greater distance

The GS108T is an ideal solution for extending network connections into conference room, labs, lobbies and department workgroups. It enables SMB networks to support Voice over IP (VoIP), streaming media, multicasting, security, and many other bandwidth-intensive applications like ERP and large file transfers. The GS108T comes with a comprehensive set of features, such as access control lists (ACL), 802.1x port authentication, enhanced QoS, rate limiting and IGMP snooping among others to provide...

1000 BASE LX GIBIC MODULE FOR SINGLE MODE FIBER THIS PRODUCT WORKS WITH NETGEAR SWITCHES Gigabit Ethernet "long-reach" fiber connectivity LC duplex connector Fits into SFP interfaces of all Fully Managed Switches Fits into SFP interfaces of all Smart Switches Fits into SFP interfaces of netgear switches Drives Gigabit Ethernet up to 10 km (6.2 miles) distances with 9/125µm single mode fiber cables Ordering part number: AGM732F

The NETGEAR AGM731F Fibre Gigabit 1000Base-SX (LC) SFP GBIC Module is a plug-in module which allows you to upgrade specific switches for faster network operations.

The UPort® 1400 USB-to-serial converters allow you to connect 4 RS-232 or RS-232/422/485 devices to your laptop or workstation through the USB (Universal Serial Bus) port. The UPort® 1400 converters are compatible with new and legacy serial devices, and are perfect for mobile, instrumentation, and point-of-sale applications

The UPort® 1250/1250I USB-to-serial converters allow you to connect 2 RS-232/422/485 devices to your laptop or workstation through the USB (Universal Serial Bus) port.These plug & play USB solutions are perfect for mobile, instrumentation, and point-of sale applications. 

The UPort® 1250/1250I USB-to-serial converters allow you to connect 2 RS-232/422/485 devices to your laptop or workstation through the USB (Universal Serial Bus) port.These plug & play USB solutions are perfect for mobile, instrumentation, and point-of sale applications.