Networking

8 x 10/100Mbps Auto-negotiation Fast Ethernet RJ-45 ports Supports PoE power up to 120W (8-port PoE) for all PoE ports Supports PoE IEEE 802.3 af

Total power up to 65Watt 4 Ports PSE/ PoE function, compliant with IEEE-802.3af Supports the power up to 15.4Watt per port Provides 5 ports of 10/100Mbps

PCI express x1 compliant 921.6 Kbps maximum baud rate for super fast data transmission 256-byte FIFO and on-chip H/W, S/W flow control Low profile form factor fits small-sized PCs

PCI express x1 compliant 921.6 Kbps maximum baud rate for super fast data transmission 256-byte FIFO and on-chip H/W, S/W flow control Low profile form factor fits small-sized PCs

8 x 10/100 TX ports having Auto MDI/MDI-X Function 2 x 10/100/1000T/SFP ports Redundant Ethernet Networ Managed Redundant Ring Network Recovery

 8 x 10/100/1000Mbps auto-negotiation, auto MDI/MDIX RJ45 ports  Green Ethernet technology   IEEE 802.3x flow control for reliable data transfer  Plastic case, desktop or wall-mounting design for home and office use  Plug and play, no configuration required

 24 x 10/100/1000Mbps RJ45 ports Supports MAC address self-learning and auto MDI/MDIX Supports 16K MAC address table 48 Gbps Switching Capacity 3.5 Mbit SDRAM Packet buffer

S-Series Stand Alone Switch provides a highly resilient distributed switching and routing architecture with management and control functions embedded in each module, delivering unsurpassed reliability, scalability, and fault tolerance.

The ExtremeSwitching X870 Series switches are high-density, purpose-built 100Gb switches designed for high-performance enterprise and cloud data centers. This enables the X870 to be flexibly deployed in either spine/leaf or high-density top of rack architectures. Low-latency cut-through switching and an advanced feature set make it ideal for high-performance data center applications.

The ExtremeSwitching X8 platform provides seamless any-to-any connectivity through a simple, scalable, and centrally orchestrated network. The ExtremeSwitching X8 eliminates expensive multi-tier architectures and the challenges of inter-device connectivity, uplink bandwidth, and latency. The ExtremeSwitching X8 also leverages a low-power design ideal for green operations and high degrees of energy efficiency, resulting in lower total cost of ownership (TCO).

The X770 series switches are purpose-built top-of-rack switches designed to support 10 Gigabit Ethernet-enabled servers and emerging 40 Gigabit Ethernet-enabled servers in enterprise and cloud data centers. The X770 series provides high density Layer 2/3 switching with MPLS and with low latency cut-through switching, and IPv4 and IPv6 unicast and multicast routing to enable enterprise aggregation and core backbone deployment in AC-powered and DC-powered environments as well as...

The ExtremeSwitching X690 Series are high-density, purpose-built 10Gb/100Gb switches ideal for top-of-rack and/or edge leaf applications within high-performance data centers. This enables it to be flexibly deployed in a variety of Enterprise LAN or high-density top-of-rack architectures. Low-latency cut-through switching and an advanced feature set make it perfect for high-performance applications.