Lantronix IBIO21002-01 IntelliBox-I/O 2100 IOT Gateway

In stock
Part Code :

IntelliBox®-I/O 2100 is a breakthrough in truly automated control of remote equipment. Powered by Lantronix EventTrak technology, this highly-advanced, programmable device server connects your equipment to an IP network and monitors it to watch for events at specified intervals.

When an event occurs, IntelliBox automatically sends pre-determined, user-defined command(s) to the equipment causing it to take appropriate and/or corrective actions – without any user intervention. IntelliBox can send email notification that the event was detected and handled accordingly. SSH/SSL enterprise-grade network security Secure remote access and control of digital I/O and relays 10/100 Ethernet interface with 1.5kv isolation (802.3 standard) Two serial ports (RS232 and RS422/485) with ESD protection and 1.5kv isolation from incoming power Two optically-isolated digital I/O

    Serial Interface

    • 2 Serial ports: 1 RS232, 1 RS422/485 (4-wire/2-wire) with terminal block connection
    • Baud rate selectable from 300 to 230 Kbps
    • Customizable baud rate support for non-standard serial speeds
    • LED indicators for TXD and RXD activities

    Serial Line Formats

    • Characters: 7 or 8 data bits
    • Stop Bits: 1 or 2
    • Parity: odd, even, none

    Flow Control

    • Hardware: RTS/CTS
    • Software: XON/XOFF

    Modem Control

    • CTS, RTS, DTR, DCD on Serial 1

    Digital I/O

    • 2 Independently configurable digital I/Os, configured via GUI set-up Menu
    • Opto-isolated to eliminate grounding issues
    • Logically compatible with 3.3V level and also higher voltage levels
    • Transient voltage and polarity reversal protection built in

Network Interface

  • 1 RJ45 Ethernet port
  • 10Base-T/100Base-TX
  • Full or half duplex
  • Auto-negotiating or hard coded

LED Indicators

  • 10Base-T and 100Base-TX Link
  • Ethernet Activity
  • Serial Transmit Data
  • Serial Receive Data
  • Power / Status


  • Internal web server
  • SNMP v2C (MIB-II, RS232MIB)
  • Serial login
  • Telnet/SSH login
  • XML
  • DeviceInstaller software

Power Input

  • Removable screw terminal block connector
  • 9-30 VDC or 9-24 VAC with chassis ground
  • 2.3W

Part Code:


You're reviewing:Lantronix IBIO21002-01 IntelliBox-I/O 2100 IOT Gateway
Your Rating