Geist Watchdog 15 / 15-P On-Board Temperature And Humidity Sensors

Geist
In stock
Part Code :
Watchdog 15


The Watchdog 15 / 15-P is a self-contained unit with on-board temperature and humidity/dew point sensors. It has an input capacity of four external sensors.

SNMP, Email & SMS Alerts

Trigger escalating alarms if temperature or humidity fall outside of specified parameters via SNMP (v1, v2c), email and SMS messages (email to SMS gateway). For example, specify an email notification to one or more users at 70° F, add another layer of personnel to the email alarm at 80° F, add your third party contractor at 85° F...specify up to 50 alarms per unit.

Interface IP Network Cameras

The Web page interfaces up to four IP cameras (not included), allowing you a quick view of remote conditions, especially useful in event of alarm.

No Software Required

The Watchdog 15 and 15-P are simple to install and use, requiring no special software other than a standard Web browser. The Watchdog 15 connects to an Ethernet network with a standard RJ45 connector and sends data in standard TCP/IP packets. It is easily configured with a simple menu using a Web browser and can be password protected with three access account level types: Administrator, Control, View Only. From within an Intranet or over the Internet, the user can securely access the monitor by entering its IP address.

The Watchdog 15 / 15-P is a self-contained unit with on-board temperature and humidity/dew point sensors. It has an input capacity of four external sensors.

SNMP, Email & SMS Alerts

Trigger escalating alarms if temperature or humidity fall outside of specified parameters via SNMP (v1, v2c), email and SMS messages (email to SMS gateway). For example, specify an email notification to one or more users at 70° F, add another layer of personnel to the email alarm at 80° F, add your third party contractor at 85° F...specify up to 50 alarms per unit.

Interface IP Network Cameras

The Web page interfaces up to four IP cameras (not included), allowing you a quick view of remote conditions, especially useful in event of alarm.

No Software Required

The Watchdog 15 and 15-P are simple to install and use, requiring no special software other than a standard Web browser. The Watchdog 15 connects to an Ethernet network with a standard RJ45 connector and sends data in standard TCP/IP packets. It is easily configured with a simple menu using a Web browser and can be password protected with three access account level types: Administrator, Control, View Only. From within an Intranet or over the Internet, the user can securely access the monitor by entering its IP address.

  • Real Time Sensor Data Feeds
  • Sensor Data Logging & Graphing
  • Data Logs
  • SNMP (v1, v2c, v3)
  • Email & Email-to-SMS Alerts
  • Alarm Escalations
  • Alarm Repeat and Delay
  • Alarm Valid Hours
  • Periodic Email Status Reports
  • Office 365 Email Support
  • Display in Metric or Imperial
  • Multiple Languages
  • Access Account Levels
  • Encryption via TLS/SSL
  • Configuration Back-up
  • Interface with IP Surveillance Cameras
  • Remote Firmware Updates

The Watchdog 15 is a compact solution weighing less than half a pound and sized to fit in a 1U space at 5.25"L x 1.75"H x 1.5"W, which is perfect for tight installments. With an operating range of -25° to 80° Celsius (-13° to 176° F), the Watchdog 15 can be used to monitor temperature, humidity and other environmental parameters in a variety of applications including IT, telecom, healthcare, food supply and others.

Part Code:

Watchdog 15

Watchdog 15-P

You're reviewing:Geist Watchdog 15 / 15-P On-Board Temperature And Humidity Sensors
Your Rating