Cisco Catalyst 2960X-48LPS-L

In stock
Part Code :
Catalyst 2960X-48LPS-L

Cisco® Catalyst® 2960-X Series Switches are fixed-configuration, stackable Gigabit Ethernet switches that provide enterprise-class access for campus and branch applications (Figure 1). Designed for operational simplicity to lower total cost of ownership, they enable scalable, secure and energy-efficient business operations with intelligent services and a range of advanced Cisco IOS® Software features.

Cisco Catalyst 2960-X switches feature:

   24 or 48 Gigabit Ethernet ports with line-rate forwarding performance

   Gigabit Small Form-Factor Pluggable (SFP) or 10G SFP+ uplinks

   FlexStack Plus for stacking of up to 8 switches with 80 Gbps of stack throughput (optional)

   Power over Ethernet Plus (PoE+) support with up to 740W of PoE budget

   24-port PoE fanless switch for deployment outside the wiring closet

   Reduced power consumption and advanced energy management features

   USB and Ethernet management interfaces for simplified operations

   Application visibility and capacity planning with integrated NetFlow-Lite

   LAN Base or LAN Lite Cisco IOS® software features

   Enhanced limited lifetime warranty (E-LLW) offering next-business-day hardware replacement

Cisco Catalyst 2960-XR models also offer:

   Power resiliency with optional dual field-replaceable power supplies

   IP Lite Cisco IOS® software with dynamic routing and Layer 3 features

 Cisco AutoSecure provides a single-line CLI to enable base line security features (Port Security, DHCP snooping, DAI). This feature simplifies security configurations with a single touch.

   Dynamic Host Configuration Protocol (DHCP) autoconfiguration of multiple switches through a boot server eases switch deployment.

   Stacking master configuration management and Cisco FlexStack Plus technology helps ensure that all switches are automatically upgraded when the master switch receives a new software version. Automatic software version checking and updating help ensure that all stack members have the same software version.

   Autonegotiation on all ports automatically selects half- or full-duplex transmission mode to optimize bandwidth.

   Dynamic Trunking Protocol (DTP) facilitates dynamic trunk configuration across all switch ports.

   Port Aggregation Protocol (PAgP) automates the creation of Cisco Fast EtherChannel® groups or Gigabit EtherChannel groups to link to another switch, router, or server.

   Link Aggregation Control Protocol (LACP) allows the creation of Ethernet channeling with devices that conform to IEEE 802.3ad. This feature is similar to Cisco EtherChannel technology and PAgP.

   Automatic media-dependent interface crossover (MDIX) automatically adjusts transmit and receive pairs if an incorrect cable type (crossover or straight-through) is installed.

   Unidirectional Link Detection Protocol (UDLD) and Aggressive UDLD allow unidirectional links caused by incorrect fiber-optic wiring or port faults to be detected and disabled on fiber-optic interfaces.

   Switching Database Manager (SDM) templates for access, routing, and VLAN deployment allow the administrator to easily maximize memory allocation to the desired features based on deployment-specific requirements.

   Local Proxy Address Resolution Protocol (ARP) works in conjunction with Private VLAN Edge to minimize broadcasts and maximize available bandwidth.

   VLAN1 minimization allows VLAN1 to be disabled on any individual VLAN trunk.

   Smart Multicast, with Cisco FlexStack-Plus technology, allows the Cisco Catalyst 2960-X Series to offer greater efficiency and support for more multicast data streams such as video by putting each data packet onto the backplane only once.

   Internet Group Management Protocol (IGMP) Snooping for IPv4 and IPv6 MLD v1 and v2 Snooping provide fast client joins and leaves of multicast streams and limit bandwidth-intensive video traffic to only the requestors.

   Multicast VLAN Registration (MVR) continuously sends multicast streams in a multicast VLAN while isolating the streams from subscriber VLANs for bandwidth and security reasons.

   Per-port broadcast, multicast, and unicast storm control prevents faulty end stations from degrading overall systems performance.

   Voice VLAN simplifies telephony installations by keeping voice traffic on a separate VLAN for easier administration and troubleshooting.

   Cisco VLAN Trunking Protocol (VTP) supports dynamic VLANs and dynamic trunk configuration across all switches.

   Remote Switch Port Analyzer (RSPAN) allows administrators to remotely monitor ports in a Layer 2 switch network from any other switch in the same network.

   For enhanced traffic management, monitoring, and analysis, the Embedded Remote Monitoring (RMON) software agent supports four RMON groups (history, statistics, alarms, and events).

   Layer 2 trace route eases troubleshooting by identifying the physical path that a packet takes from source to destination.

   Trivial File Transfer Protocol (TFTP) reduces the cost of administering software upgrades by downloading from a centralized location.

   Network Timing Protocol (NTP) provides an accurate and consistent timestamp to all intranet switches.




Hardware Specifications

Flash memory

128 MB for LAN Base & IP Lite SKUs, 64 MB for LAN Lite SKUs


512 MB for LAN Base and 256 MB for LAN Lite


APM86392 600MHz dual core

Console Ports

USB (Type-B), Ethernet (RJ-45)

Storage Interface

USB (Type-A) for external flash storage

Network Management Interface

10/100 Mbps Ethernet (RJ-45)


Performance and Scalability


2960-X LAN Lite

2960-X LAN Base

2960-XR IP Lite

Forwarding bandwidth

50 Gbps

108 Gbps

108 Gbps

Switching bandwidth*

100 Gbps

216 Gbps

216 Gbps

Maximum active VLANs




VLAN IDs available




Maximum transmission unit (MTU)-
L3 packet

9198 bytes

9198 bytes

9198 bytes

Jumbo frame - Ethernet frame

9216 bytes

9216 bytes

9216 bytes

Forwarding Rate: 64-Byte L3 Packets

Catalyst 2960-XFamily

Cisco Catalyst 2960X-48FPD-L

130.9 Mpps

Cisco Catalyst 2960X-48LPD-L

130.9 Mpps

Cisco Catalyst 2960X-24PD-L

95.2 Mpps

Cisco Catalyst 2960X-48TD-L

130.9 Mpps

Cisco Catalyst 2960X-24TD-L

95.2 Mpps

Cisco Catalyst 2960X-48FPS-L

107.1 Mpps

Cisco Catalyst 2960X-48LPS-L

107.1 Mpps

Cisco Catalyst 2960X-24PS-L

71.4 Mpps

Cisco Catalyst 2960X-24PSQ-L

71.4 Mpps

Cisco Catalyst 2960X-48TS-L

107.1 Mpps

Cisco Catalyst 2960X-24TS-L

71.4 Mpps

Cisco Catalyst 2960X-48TS-LL

104.2 Mpps

Cisco Catalyst 2960X-24TS-LL

68.5 Mpps

Catalyst 2960-XR Family

Cisco Catalyst 2960XR-48FPD-I

130.9 Mpps

Cisco Catalyst 2960XR-48LPD-I

130.9 Mpps

Cisco Catalyst 2960XR-24PD-I

95.2 Mpps

Cisco Catalyst 2960XR-48TD-I

130.9 Mpps

Cisco Catalyst 2960XR-24TD-I

95.2 Mpps

Cisco Catalyst 2960XR-48FPS-I

107.1 Mpps

Cisco Catalyst 2960XR-48LPS-I

107.1 Mpps

Cisco Catalyst 2960XR-24PS-I

71.4 Mpps

Cisco Catalyst 2960XR-48TS-I

107.1 Mpps

Cisco Catalyst 2960XR-24TS-I

71.4 Mpps


Environmental Ranges




Operating temperature up to 5000 ft (1500 m)

23ºF to 113ºF

-5ºC to 45ºC

Operating temperature up to 10,000 ft (3000 m)

23ºF to 104ºF

-5ºC to 40ºC

Short-term exception at sea level*

23ºF to 131ºF

-5ºC to 55ºC

Short-term exception up to 5000 feet (1500 m)*

23ºF to 122ºF

-5ºC to 50ºC

Short-term exception up to 10,000 feet (3000 m)*

23ºF to 113ºF

-5ºC to 45ºC

Short-term exception up to 13,000 feet (4000 m)*

23º to 104ºF

-5ºC to 40ºC

Storage temperature up to 15,000 feet (4573 m)

-13º to 158ºF

-25º to 70ºC




Operating altitude

Up to 10,000

Up to 3000

Storage altitude

Up to 13,000

Up to 4000

Operating relative humidity

10% to 95% noncondensing

Storage relative humidity

10% to 95% noncondensing

Acoustic Noise

Measured per ISO 7779 and declared per ISO 9296. PoE output of 185W or less where applicable.

Bystander positions operating mode at 25°C ambient.



Part Code:

 Catalyst 2960X-48LPS-L

You're reviewing:Cisco Catalyst 2960X-48LPS-L
Your Rating