Black Box SDR-120-48 DIN Rail Power Supply

Black Box
In stock
Part Code :
SDR-120-48


DIN Rail Power Supply, 120 Watts, 48 VDC

  • LED indicates DC power.
  • Universal 85–264-VAC input. It also accepts, but is not certified for, 120–370-VDC power.
  • LED indicates DC power.
  • Universal 85–264-VAC input. It also accepts, but is not certified for, 120–370-VDC power.
  • Extended operating temperature range of -4 to +158° F.
  • Finger-safe terminals.
  • Protection from short circuits, overload, and over-voltage.
  • UL, CE approved.
  • Compact DIN rail mount power supply measuring less than two inches wide.
  • Features 90.5% efficiency.
  • Use to power industrial devices such as Heavy Duty Edge Switches and Media Converter Switches.
Environmental
Operating temperature: -13 to +158° F (-25 to +70° C); 
Storage temperature: -40 to +185° F (-40 to 85° C); 
Operating humidity: 20-90%, non-condensing; 
Storage humidity: 10-95%; 
Temperature coefficient: ±0.03%/° C, (0-50° C); 
Vibration: component: 10-500 Hz, 2G 10 minutes/1 cycle, 60 minutes each along X, Y, Z axes; mounting: compliant to IEC60068-2-6 
Power Protection
Overload: Normally works within 110-150% rated output power for more than 3 seconds and then shut down o/p voltage; Protection type: constant current limiting with auto-recovery within 3 seconds and shut down o/p voltage after 3 seconds; Over voltage: 48-55V;Protection type: Shut down o/p voltage, repower on to recover 
CE Approval Yes
Power
Output:
DC voltage: 48V; 
Rated current: 2.5A; 
Current range: 0-2.5A; 
Rated power: 120 watts; 
Ripple and noise (maximum): 120mVp-p; 
Voltage tolerance: ±1.0%; 
Line Regulation: ±1.0%; 
Load Regulation: ±1.0%; 
Setup, rise time: 500 ms, 30 ms/230-VAC; 500 ms, 30 ms/115-VAC at full load; 
Hold up time (typical): 50 ms/230-VAC; 20 ms/115-VAC at full load; 
Input: Voltage range: 85-264-VAC, 120-370-VDC; 
Frequency range: 47-63Hz; 
Efficiency (typical): 90.5%; 
AC Current (typical): 1.4A/115-VAC; 0.7A/230-VAC; 
Inrush current (typical): 35A/115-VAC, 70A/230-VAC; 
Leakage current: <1mA/240-VAC
Dimensions 4.9"H x 1.6"W x 4.4"D (12.5 x 4 x 11.3 cm)
Weight 1.5 lb. (0.7 kg)

Part code:

SDR-120-48

You're reviewing:Black Box SDR-120-48 DIN Rail Power Supply
Your Rating