Aten PN9108U Power Basic PDU
In stock
Part Code :
PN9108U
Add your review The PN9108 Power over the NET™ is a control unit that provides remote power management for eight AC outlets via a TCP/IP connection, allowing administrators to control the power off, power on, and reboot status for each attached device from any computer connected to the Internet, whether down the hall, or half way around the world.The PN9108 is the most convenient, reliable and cost effective way to obtain access to your server room remotely.
The PN9108 Power over the NET™ is a control unit that provides remote power management for eight AC outlets via a TCP/IP connection, allowing administrators to control the power off, power on, and reboot status for each attached device from any computer connected to the Internet, whether down the hall, or half way around the world.The PN9108 is the most convenient, reliable and cost effective way to obtain access to your server room remotely.
- Remote power on / off / reboot control for eight outlets via TCP/IP and a built in 10/100 Ethernet port
- Local power on / off / reboot control via the PN9108’s RS-232 port to the computer’s RS-232 port
- Daisy chain up to 15 additional stations to control up to 128 outlets
- Manual switching between Local and Remote access for each port via front panel push button switches
- Individual control of each port - users can set the power on sequence and delay time for each port to allow equipment to be turned on in the proper order
- Easy setup and operation via a browser interface
- Provides three configuration/management methods: Browser; Telnet; or Console Terminal
- Safe shutdown and rebooting for Windows systems*
- Overcurrent protection and recovery for each AC port (110 V model only) plus total port overcurrent protection (both models) - remote users can monitor the outlet status via the GUI interface on their browsers
- Separate circuits for the unit’s power and the power to the devices - the power control status menu is still accessible even when an overload condition trips the devices' circuit breaker
- Cumulative load measurement - remote users can view load information in amperes via the GUI on their browsers
- On/Off scheduling - allows everything from a one-time start/shutdown, to daily, weekly, etc. starts/shutdowns at user-specified times
- Port grouping - perform the same action on a specified group of ports
- Current Display for easy current status monitoring
- Out of Band (OOB) operation via terminal or dialup connection
- Two level (Administrator and User) security
- Detachable front panel for convenient rack mounting
- UL/TUV approved
- Multiplatform support: Windows 2000/XP/Vista, Linux, Unix and FreeBSD.
- Network Interfaces: TCP/IP, PPP, UDP, HTTP, HTTPS, SSL, SMTP, DHCP, ARP, NTP, DNS, Telnet, 10Base-T/100Base-TX, auto sense, Ping
| Housing | |
| Case | Metal |
| Power | |
| Voltage | 110 - 220 Auto Sensing |
| LEDs | |
| Power On | 1 (Blue) |
| On Line | 8 (Orange) |
| Station ID | 2 x 4 Segments (Yellow) |
| Remote | 8 (Green) |
| Link | 1 (Green) |
| 10/100 Mbps | 1 (Orange/Green) |
| Port Selection | 8 x Push Button/User Interface |
| Power Consumption | 120V/60HZ/16W or 230V/50HZ/16W |
| Scan Interval | User Specified: 1 - 255 secs. |
| Computer Connections | |
| Direct | 8 |
| Daisy Chain or Cascading | 128 |
| CPU Connectors | |
| Peripherals | 1 x DB-9 male |
| Flash ROM Upgrade | VIA RJ45 |
| Humidity | 0 - 80% RH |
| Power Connections | 3 Prong NEMA 15AMP |
| Daisy Chain | In 1 x DB-9(F)
Part Code: PN9108U
Related Products BY Category
    |
