Aten CE770 USB KVM Extender
In stock
Part Code :
CE770
Add your review The 2A-130G VGA EDID Emulator is designed for ATEN KVM extender or video extender installations that do not utilize a local monitor at the site where the computer/video source.
The 2A-130G VGA EDID Emulator is designed for ATEN KVM extender or video extender installations that do not utilize a local monitor at the site where the computer/video source is located. The 2A-130G emulates and stores a default ATEN EDID (Extended Display Identification Information) setting in a non-volatile memory. This means the computer/video source can still "see" the display, even though it is not directly connected.
The 2A-130G is suitable for any ATEN KVM or video extender installation where a monitor is not required at the local site, providing a simple, cost-saving, and convenient solution for display-related boot-up problems
- Local and Remote Units connect at distances up to 300 m using Cat 5e cable
- Dual console operation - control your system from both the local and remote USB keyboard, monitor, and mouse consoles
- Deskew Function - automatically synchronizes the time delay of RGB signals to compensate for distance
- Built-in ASIC for greater reliability and compatibility
- Auto Signal Compensation (ASC)
- RS-232 serial ports - allow you to connect to a serial terminal, or serial devices such as touchscreens and barcode scanners
- Sun/Mac keyboard support and emulation*
- Audio Enabled - supports stereo speakers and microphone
- USB overcurrent detection and prevention
- Pushbutton operating mode selection (Local Unit only) - select between Local and Auto operating modes, with the press of a single button
- Built-in 8KV/15KV ESD protection (Contact voltage 8KV; Air voltage 15KV) and 2KV surge protection
- High resolution video - up to 1920 x 1200@60Hz (150 m); 1280 x 1024@60Hz (300 m)
- Superior Audio - no loss in audio quality at 300 m
- Spports Wide Screen formats
- Supports VGA, SVGA, SXGA (1280 x 1024), UXGA (1600 x 1200), WUXGA (1920 x 1200) and multisync monitors; local monitor supports DDC; DDC2; DDC2B
- Hot pluggable
- Rack mountable
- Easy to install - no software required - connecting cables to the devices is all it takes
1. PC keyboard combinations emulate Sun/Mac keyboards
2. Sun/Mac keyboards only work with their own computers
| Function | CE770L | CE770RQ | ||
| Connectors | Console Ports |
Keyboard | 1 x USB Type A Female (White) | |
| Video | 1 x HDB-15 Female (Blue) | |||
| Mouse | 1 x USB Type A Female (White) | |||
| Speakers | 1 x Mini Stereo Jack Female (Green) | |||
| Mic. | 1 x Mini Stereo Jack Female (Pink) | |||
| RS-232 | 1 x DB-9 Female (Black) | 1 x DB-9 Male (Black) |
||
| KVM Ports |
Keyboard/ Video / Mouse | 1 x SPHD-17 Female (Yellow) |
N/A | |
| Speakers | 1 x Mini Stereo Jack (Green) |
|||
| Mic. | 1 x Mini Stereo Jack (Pink) | |||
| Power | 1 x DC Jack (Black) | |||
| Unit to Unit | 1 x RJ-45 Female (Black) | |||
| LEDs | Local | 1 (Green) | N/A | |
| Remote | 1 (Green) | N/A | ||
| B | N/A | 1 (Blue) | ||
| G | Link | N/A | 1 (Orange/Green) | |
| R | Remote | N/A | 1 (Red) | |
| Pushbuttons | Operating Mode Selection | 1 x Pushbutton | N/A | |
| Color / Up | N/A | 1 x Pushbutton | ||
| Select / Down | N/A | 1 x Pushbutton | ||
| Emulation | Keyboard / Mouse | USB | ||
| Video | 1920 x 1200 @ 60Hz (150 m); 1280 x 1024 @ 60Hz(300m); DDC, DDC2, DDC2B |
|||
| Power Consumption | DC5.3V/3.5W | DC5.3V/5.1W | ||
| Environment | Operating Temp. | 0 - 50°C | ||
| Storage Temp. | -20 - 60°C | |||
| Humidity | 0-80% RH, Non-condensing | |||
| Physical Properties | Housing | Metal | ||
| Weight | 0.49 kg | 0.48 kg | ||
| Dimensions (L x W x H) |
20.00 x 8.00 x 2.50 cm | |||
Part Code
CE770
