APC AP7752 Rack-mount Transfer Switches Input:100V ATS

APC
In stock
Part Code :
AP7752


APC Rack-mount Transfer Switches, Input: 100V, 120V, Input Connections: NEMA L5-20P, Cord Length:8 feet ( 2.44 meters ), Output: 120V, Output Connections: NEMA 5-20R

Local Current Monitoring Display
The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)

Wide range of input and output connections
Product family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs and outputs allow users to adapt to varying power requirements. APC offers units that bring up to 14.4kW using a single branch whip.

Remote Management Capabilities
Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.

Dual Input Power Sources
Supplies redundant AC power to connected equipment. Two AC lines power the unit and if the primary AC power fails, the unit will automatically switch to the alternative power source.

Output  
Nominal Output Voltage                                          
120V   
Maximum Total Current Draw per Phase
20A                                                                      
Output Connections
(10) NEMA 5-20R
Overload Protection  NO
Input
 
Nominal Input Voltage
100V, 120V                                                  
Input Frequency
47-63 Hz                                                  
Regulatory Derated Input Current (North America)
16A
Input Connections
NEMA 5-20P
Cord Length
2.44 meters     
Number of Power Cords 2
Maximum Line Current per phase 20A
Maximum Input Current per phase 20A
Physical  
Net Weight 4.68 KG
Maximum Height 44.00 mm
Maximum Width 432.00mm
Maximum Depth 229.00 mm
Shipping Weight 6.75Kg
Shipping Height 114.00 mm
Shipping Width 600.00 mm
Shipping Depth 349.00mm
Environmental  
Operating Environment -5 - 45 °C
Operating Relative Humidity                               
0 - 95%
Operating Elevation 0-3000 meters
Storage Temperature -25 - 65 °C
Storage Relative Humidity 0 - 95%
Storage Elevation 0-15000 meters
Conformance
 
Regulatory Approvals EN 55022 Class A, FCC Part 15 Class A
Standard Warranty 2 years repair or replace
Sustainable Offer Status  
RoHS Compliant
REACH REACH: Contains No SVHCs
Battery Directive
Compliant   
Battery Notes Contains Lithium Coin Cell

Part Code:

AP7752

You're reviewing:APC AP7752 Rack-mount Transfer Switches Input:100V ATS
Your Rating